Hydronix HX-SPC-25-1030/3 Universal Whole House Pleated Sediment Water Filter, Reusable & Washable 2.5" x 10", 30 Micron, 3-Pack, White
Product Description
Hydronix HX-SPC-25-1030/3 Universal Whole House Pleated Sediment Water Filter
The Hydronix HX-SPC-25-1030/3 is a whole house sediment filter designed for universal installation. Each filter features a pleated media construction that provides a large surface area for capturing sediment particles. The filters are manufactured with a 30 micron rating, indicating the maximum particle size that can be retained by the media. The physical dimensions of each unit are 2.5 inches in diameter and 10 inches in length, a size that is compatible with standard water line fittings used in residential plumbing systems.
Reusable and Washable Construction
A distinguishing feature of this filter is its reusable and washable nature. After routine use, the filter media can be removed from the housing and cleaned with a suitable rinsing process. Once cleaned, the filter is ready for reinstallation without the need for a replacement media cartridge. This design supports extended usage and reduces the frequency of filter changes, while maintaining the specified 30 micron capture capability.
Three‑Pack Configuration
The product is supplied in a set of three filters. This configuration allows users to install multiple filters in parallel or to replace one filter at a time while the other units continue to provide filtration. The three‑pack provides a balanced approach between coverage and convenience for whole house systems.
White Finish
Each filter is finished in a neutral white color. The uniform appearance integrates seamlessly with typical plumbing fixtures and does not affect the visual design of the water supply lines.
Installation Guidance
- Locate a suitable 2.5‑inch water line that can accommodate the 10‑inch length of the filter housing.
- Disconnect the water supply line from the existing plumbing configuration.
- Insert the filter housing into the line, ensuring a snug fit on both ends.
- Reconnect the water line, then check for leaks around the filter connections.
- Open the water supply and allow the system to run for a short period to purge any loose particles from the new filter.
Maintenance Procedures
Maintaining the filter’s performance involves periodic cleaning. The following steps are recommended for each wash cycle:
- Shut off the water supply to the filter unit.
- Remove the filter media from the housing.
- Rinse the media with clean water until the rinse water runs clear.
- Reinstall the media and seal the housing for reinstallation.
- Reattach the filter to the water line and verify that it is secure.
- Restore the water supply and allow the system to operate for a brief period.
Cleaning should be performed when sediment buildup is observed or at regular intervals recommended by the system manufacturer. Following the cleaning process restores the filter’s 30 micron capture capability for continued use.
Packaging and Storage
Each filter is individually packaged to preserve its condition during shipping and handling. Once in the home, filters can be stored in a dry, cool environment. The white finish remains bright after storage, provided the filters are kept free of direct sunlight and excess moisture.
Applications
This filter is intended for whole house sediment filtration. It is suitable for use in residential plumbing systems where a standard 2.5‑inch diameter line is present. The pleated media offers effective capture of fine sediment particles up to 30 microns while the reusable design supports efficient maintenance.