OVONIC 4s Lipo Battery 100C 1300mAh 14.8V Lipo Pack with XT60 Connector for RC FPV Racing Drone Quadcopter
Product Description
OVONIC 4s LiPo Battery – 1300mAh, 100C, 14.8V with XT60 Connector
The OVONIC 4s LiPo battery is a single‑cell pack configured as a 4‑cell series (4s) battery, providing a nominal voltage of 14.8 volts. The battery has a total capacity of 1300 milliampere‑hours (mAh) and a maximum continuous discharge rate of 100C, which is expressed as a multiplier of the battery’s capacity. For this pack, a 100C rating means it can safely deliver up to 130,000 milliamperes (mA) of current during use.
Key Specifications
- Configuration: 4s (four cells in series)
- Nominal Voltage: 14.8V
- Capacity: 1300mAh
- Maximum Continuous Discharge: 100C
- Connector Type: XT60
- Intended Use: RC FPV racing drones, quadcopters
Battery Capacity Explained
The capacity of 1300mAh indicates how much charge the battery can hold. In practice, this measurement helps determine the operating time of a device under a given load. For a 4s LiPo, a 1300mAh pack provides a balance between weight, size, and available energy. The capacity is listed in milliampere‑hours, a standard unit for battery energy storage.
Discharge Rate and Power Delivery
The 100C rating is a specification used in LiPo battery technology to describe the safe maximum continuous discharge current relative to the battery’s capacity. A 100C rating on a 1300mAh pack means the battery can safely provide up to 130,000 milliamperes, or 130 amperes, without exceeding its internal limits. This rating is relevant for applications that require high burst power, such as racing drones that demand rapid acceleration and maneuverability.
Voltage and Cell Configuration
Each LiPo cell has a nominal voltage of 3.7 volts. A 4s configuration adds the voltage of four cells together, yielding 14.8 volts nominal. This voltage level is common among many quadcopter and FPV racing drone systems. The voltage determines how much electrical energy is available to drive motors, power electronics, and other onboard components.
Connector Details – XT60
The XT60 connector is a widely used high‑current pin connector in the drone community. It is capable of handling the 100C discharge current safely. The connector features a 60‑amp rating, matching the maximum current that can be drawn from the battery. It is designed for easy mating and dismounting, providing a reliable electrical connection between the battery pack and the drone’s power distribution board.
Intended Application – RC FPV Racing Drones
Designed for remote control first‑person view (FPV) racing drones and quadcopters, this battery pack supports the power demands of racing flight. FPV racing drones typically require fast, responsive power delivery to achieve high speeds and rapid directional changes. The 4s configuration, combined with a 100C discharge rating, allows these drones to draw the necessary current for high‑performance motor operation during racing sessions.
How to Use
When installing the battery, align the XT60 connector with the corresponding port on the drone’s power distribution board. Ensure a firm, secure connection to prevent electrical contact loss during flight. Before use, charge the battery with a charger that matches the battery’s voltage and capacity specifications. Follow any manufacturer guidelines for charging to maintain the battery’s health.
Storage and Handling
Store the battery in a dry environment, at a temperature that does not exceed the specifications typical for LiPo cells. Avoid exposure to moisture or extreme temperatures, as these conditions can affect the battery’s internal chemistry. When not in use, keep the battery in a safe place away from direct contact with metal objects that could short the XT60 connector.
Compatibility Notes
Because the battery uses an XT60 connector, it is directly compatible with drones and power systems that accept the same connector type. The 4s voltage and capacity should be checked against the drone’s motor and ESC specifications to ensure that the power supply matches the required input range. The 100C rating indicates the maximum continuous current draw, which should be compared with the drone’s average current consumption during typical flight conditions.
Summary
OVONIC’s 4s LiPo battery delivers 14.8 volts at a capacity of 1300mAh and a discharge capability of 100C. Its XT60 connector offers a robust, high‑current interface suitable for racing drones and quadcopters. These specifications support the demanding power requirements of RC FPV racing, allowing pilots to match the battery’s performance with their drone’s electrical system for reliable, high‑speed operation.