VCELINK Network Punch Down Impact Tool Kit with 110 & 66 Blades for Cat6A/Cat6/Cat5/Cat3 Keystone Terminals and Wire Stripping
Product Description
Product Overview
The VCELINK Network Punch Down Impact Tool Kit is engineered for professionals and enthusiasts working with structured cabling systems. It focuses on precise termination of Category 6A, Category 6, Category 5, and Category 3 keystone terminals. The kit is designed to streamline the punch down process while incorporating a wire stripping component to manage cable preparation efficiently.
Key Features
- Dual‑blade configuration: 110‑blade and 66‑blade sets for versatile terminal compatibility.
- Impact punch design for consistent, clean contact with keystone jack posts.
- Integrated wire stripper for easy removal of insulation from Ethernet cables.
- Tool kit includes all necessary components to complete a full termination cycle.
Tool Components
The kit comprises a main punch down tool equipped with interchangeable blade sets, a dedicated wire stripper, and a set of instruction sheets. The 110‑blade set is tailored to accommodate the deeper contacts found in higher‑grade Category 6A and Category 6 terminals, while the 66‑blade set matches the contact geometry of lower‑grade Category 5 and Category 3 terminals. Each blade set is positioned to allow quick switching between different cable types during installation.
Supported Applications
Use the tool kit when installing or repairing structured cabling in residential, commercial, or data‑center environments. It is suitable for both new installations and maintenance tasks that require termination of Cat6A, Cat6, Cat5, and Cat3 keystone jacks. The integrated wire stripper enables removal of insulation from Cat6A, Cat6, Cat5, and Cat3 cables prior to punch down, ensuring a clean connection.
How to Use
The following steps outline a typical workflow with this tool kit:
- Prepare the Cable: Strip the outer jacket using the wire stripper to expose the individual pairs.
- Align the Blade Set: Insert either the 110‑blade or 66‑blade set into the punch down tool based on the terminal type.
- Insert the Pair: Position the cable pair in the corresponding slot of the keystone terminal.
- Impact Punch: Apply a firm, single impact with the tool to secure the pair within the terminal’s contacts.
- Inspect the Termination: Verify that the pair is fully seated and that no insulation remains between the contacts.
- Repeat the process for each pair in the cable until termination is complete.
Care & Maintenance
After each use, clean the blade surfaces with a dry cloth to remove any residual cable fibers. Store the tool in a dry environment to prevent corrosion. Avoid applying excessive force beyond a single impact per pair to maintain the integrity of the contacts.